p112 Leckey BeMe User Manual
SECTION 18.24:
ADJUSTING LATERALS
WIDTH, HEIGHT AND
ANGLE
SECTION 18.25:
ADJUSTING LATERALS
DEPTH
To adjust the Lateral height, width and angle,
loosen the bolt at the back of the basic
backrest
, or at the back of the moderate
and complex backrest
. Adjust the height,
width and angle to the desired position and
tighten to secure in place.
To adjust the lateral depth, open the Velcro
of the cover to gain access to the adjustment
bolt
. Loosen the bolt and adjust forward or
backward to the desired position. Tighten the
bolt to secure in place. Reattach the Velcro
cover.
To Next Page
Loading...
