p114 Leckey BeMe User Manual
SECTION 18.28:
ADJUSTING ARMREST
ANGLE
SECTION 18.29:
ADJUSTING ARMREST
DEPTH
To adjust the armrest angle, locate the cam
lever
, in the centre of the armrest. Raise the
cam lever to unlock and change the angle of
the armrest
, to the desired position. Secure
by lowering the cam lever to the locked
position
.
To adjust the armrest depth, remove the
bolts
, to separate the PU pad , from
the platework
. Reposition the pad in one
of the three positions and insert the bolts.
Tighten the bolts to secure in place.
To Next Page
Loading...
