Leckey BeMe - Page 15

Leckey BeMe User Manual p15
SECTION 9.4:
ATTACHING,
DETACHING AND
ADJUSTING 2POINT
BELT
To attach the 2-point belt, pass the grey
webbing through the upper slot in the
seat moulding
, and then through the
cam buckle
. Pull the webbing taught
and secure the cam buckles. Ensure belt is
orientated with padding facing towards child.
To detach the 2-point belt, reverse the
process.
Attach the buckle , at the front to
secure the user.
Always attached the pelvic strap
first before making any other
adjustments.
Safety Information: You must
ensure when using the 2-point
belt that the webbing is fed
through the slot in the seat core (not over
the seat core). This is also recommended
when using the 4-point belt.