Leckey BeMe - Page 21

Leckey BeMe User Manual p21
Warning: Only use the tilt-in-
space feature on level ground.
If the tilt-in-space is used with
high seat positions, then there
is a risk of the seating system
becoming unstable when
parked on a sloping surface.
The tilt-in-space can be angled
while the user is in the seat.
Before you adjust the tilt-in-
space angle of the seat, always
ensure the pelvic belt is secured
preventing the user from sliding
forward in the seat.
SECTION 9.11:
TILT IN SPACE  LARGE
HIGHLOW CHASSIS
To adjust the tilt angle, pull the lever on the
push handles
1
, tilt the seat to the required
angle and remove your hand from the lever.
1
Always keep the tilt-in-space lever in the
locked position to prevent accidental
actuation of the lever which could cause the
seat unit to jolt and possibly cause injury to
the child.
Please use the handle bars when operating
tilt-in-space.
Always check with your therapist that the use
of tilt-in-space will not cause any obstructions
to the child’s airways.