Leckey BeMe - Page 55

Leckey BeMe User Manual p55
SECTION 16.12:
ATTACHING AND
DETACHING ANKLE
WRAPS
To attach the ankle wrap, feed the lower
, and upper , poppers of the ankle wrap
under and over the back arch of the sandal
and snap together
.
Feed the triglide , which is attached to
the black and white webbing, through the
side slot of the sandal. Feed the black and
white Velcro webbing strip
E
, through the
opposite slot in the sandal. Feed the end of
this webbing through the triglide and double
back to secure in place against the Velcro
F
.
E
F
To detach the ankle wraps, reverse the
process.