Leckey BeMe - Page 64

p64 Leckey BeMe User Manual
Place the back plate pacer , onto the front
surface of the lower clamp moulding
.
Reattach the backrest platework by securing
the four screws, top and bottom
.
To detach the small basic backrest spacers,
reverse the process. This should only be done
once before it is required to replace the basic
backrest clamps also.
SECTION 16.22:
ATTACHING AND
DETACHING SMALL
BASIC BACKREST
SPACER
To attach the small basic backrest spacer,
remove the cushion cover from the backrest
and remove the four screws, top and bottom,
, to separate the backrest platework from
the clamps. Secure the spacers using the
four longer screws onto the top and bottom
clamps
.