Leckey BeMe - Page 71

Leckey BeMe User Manual p71
Loosen the bolts of the shoulder pad clamp,
, and slide off the backrest tube. Slide the
shoulder pad clamp onto the rain canopy
backrest tube and secure the bolts
.
Place the ends of the backrest tube into the
receivers of the backrest height clamp. Press
in the poppers
E
, at the sides and push the
backrest tube down further. Tighten the bolts
of the backrest height adjustment clamp
F
.
E
F
To attach the rain canopy, slide the
connectors down and over the receiver
G
, and rotate the clip inwards
H
, to snap
into position.
G