Leckey BeMe - Page 73

Leckey BeMe User Manual p73
SECTION 16.31:
ATTACHING AND
DETACHING ELBOW
BLOCKER
To attach the elbow blockers, first remove the
tray from the seat. Remove the two washers
and bolts
. Position the elbow blocker
bracket
, so that the edge of the pad rests
on the top surface of the tray
, and align the
holes. Reattach the two bolts and washers
,
and secure using the Allen key.
To detach the elbow blocker, reverse the
process.
The elbow blockers can be installed on both
the standard and padded tray.