p82 Leckey BeMe User Manual
SECTION 16.40:
ATTACHING AND
DETACHING BACKREST
To attach the backrest, locate the backrest
receiver at the back of the seat base
.
Open up the receiver lock paddles
, at the
back of the seat base by pulling horizontally
outwards on the paddles and then rotating
upwards.
Place the base of the backrest
, into the
receiver, ensuring it is as deep into the
receiver as it can go. Rotate the paddles
downwards
, and push inwards
E
, to
secure the backrest in place.
Check that it is secure by pulling up on the
backrest and moving it forward and back.
To Next Page
Loading...
