Leckey BeMe - Page 85

Leckey BeMe User Manual p85
SECTION 17.3:
ATTACHING AND
DETACHING SPLIT SEAT
CUSHION
To attach the split seat cushion to the back
of the seat, locate the row of snap fastener
tabs
, at the back of the seat base. Slot the
fastener tabs between the seat cushion and
the webbing
, and secure in place with the
fasteners
.
Always check the seat base
cushion is secure before placing
the child in the seat.
To attach the front of the split seat cushion,
align the front of each side of the cushions
with the front of each of the seat ramps, and
press down to Velcro in place. Locate the
fasteners at the front of the seat base
. Drop
the front flap of the seat cushion down and
secure in place with the fasteners
E
.
To detach the split seat cushion, reverse the
process.
E