Leckey BeMe - Page 95

Leckey BeMe User Manual p95
SECTION 17.16:
ATTACHING AND
DETACHING HEADREST
COVER
SECTION 17.17:
ATTACHING AND
DETACHING FOOTREST
COVER
To attach the headrest cover, align the
headrest cover with the front of the moulding
and wrap the cover over both ends
,
securing in place with the zips
. Ensure to
align the cover so that the zip is closest to the
bottom edge.
To attach the footrest cover, first remove any
hardware or straps that are attached to the
footrest. Place the footrest cover onto the top
surface of the footrest, at the rear
. Place
the cover, over the top surface of the footrest,
so that the raised sides of the cover align with
the back and sides of the footrest. Secure on
the underside using the Velcro straps
.
To detach the headrest cover, reverse the
process.
To detach the footrest cover, reverse the
process.