Need help?Do you have a question about the Ledi RGB DMX DECODER and is the answer not in the manual?
General| Brand | Ledi |
|---|---|
| Model | RGB DMX DECODER |
| Category | Media Converter |
| Language | English |
Identifies and describes the decoder's input/output terminals, digital display, ports, and control buttons.
Details wiring RGB tape light to output terminals and connecting CAT-5 cable to input port.
Explains how to connect multiple decoders in series using CAT-5 cables for expanded systems.
Covers connecting the DMX terminator and low voltage DC driver to the decoder's input terminals.
Details connecting the DC electronic driver's line voltage ends to the AC power source.
Introduces DMX512 protocol and assigning channels to RGB LED tape light sections.
Describes the digital display and the three buttons used for programming the decoder.
Instructions for setting the DMX Start Channel to channel 4 for each decoder unit.
Steps to configure decoders for all sections to operate identically via the controller.
Steps to address individual sections for separate control, including sequential numbering.
Instructions for testing effects and resolving synchronization issues between sections.
To Next Page