Leer 217988 - Placing the Cap on the Truck

4
ENGLISH
1. Clean bedrails, top of bulkhead, rear truck window and front
window of cap with 50/50 isopropyl alcohol and a clean cloth.
2. Open truck tailgate and rear door of cap.
3. (a) If using a forklift, be cautious of windows and lights while
putting forklift about half-way into the cap to ensure proper
support. Place carefully on the truck.
(b) If using (4) four people, have one person at each corner of
thecap.Beingverycarefulofpinch-pointsandvehiclenish,
place cap on truck.
4.Squarecapontruckbedfromsidetosideandushto
front of truck bed. Cap should overhang the rear of the
truck bed by 7/16”. Align cap door opening with truck tailgate
opening. (Fig A)
5. Close the truck tailgate and cap rear door.
Checktandfunctionofdoor,handle,andseals.(FigB)
Adjustasnecessaryforproper t.
Open truck tailgate and rear door of cap, using a forklift or (4) people
place the cap on the truck.
FigB.Checkt&functionofdoor,handle&seals.
Fig A. Square cap on truck.
PLACING THE CAP
ON THE TRUCK