LEGA
LEGA LEGA
LEGA
srl
srlsrl
srl
C
CC
Costruzioni
ostruzioni ostruzioni
ostruzioni A
AA
Apistiche
pistichepistiche
pistiche
–
––
–
via Maestri del Lavoro 23
via Maestri del Lavoro 23 via Maestri del Lavoro 23
via Maestri del Lavoro 23 –
––
–
48018 Faenza
48018 Faenza48018 Faenza
48018 Faenza
www.legaitaly.com
www.legaitaly.com www.legaitaly.com
www.legaitaly.com -
--
-
Tel 054626834
Tel 054626834 Tel 054626834
Tel 054626834 –
––
–
Fa
FaFa
Fax 054628279
x 054628279 x 054628279
x 054628279 –
––
–
P.iva 00043230390
P.iva 00043230390P.iva 00043230390
P.iva 00043230390
18 / 68
1.0
1.01.0
1.0
GENERAL SAFETY DIRECTIONS
GENERAL SAFETY DIRECTIONSGENERAL SAFETY DIRECTIONS
GENERAL SAFETY DIRECTIONS
READ THIS MANUAL THROUGHOUT BEFORE USING THE MACHINE
This handbook forms an integral part of the machine and should be kept with it throughout its working life.
The machine includes dangerous electrically live and moving parts, which can cause serious damages to
persons or property in case of:
- incorrect use
- removal of guards or disconnection of safety devices
- poor inspection and servicing
- tampering with the electric system
These directions must be completed and updated according to applicable legal provisions and technical safety
standards.
The manufacturer may not be held responsible for failures, breaks or accidents re
The manufacturer may not be held responsible for failures, breaks or accidents reThe manufacturer may not be held responsible for failures, breaks or accidents re
The manufacturer may not be held responsible for failures, breaks or accidents resulting from incorrect use of the
sulting from incorrect use of the sulting from incorrect use of the
sulting from incorrect use of the
machine or failure to follow the directions contained in this manual.
machine or failure to follow the directions contained in this manual.machine or failure to follow the directions contained in this manual.
machine or failure to follow the directions contained in this manual.
1.1
1.11.1
1.1
IDENTIFICATION OF THE MACHINE
IDENTIFICATION OF THE MACHINEIDENTIFICATION OF THE MACHINE
IDENTIFICATION OF THE MACHINE
Motor-driven rotating plate loader equipped with a pneumatic honey packer for automatic filling of honey jars
(impulse sent by jar detection).
Controls from a LOGO microprocessor by SIEMENS.
1.2
1.21.2
1.2
TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONSTECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS
Honey filling capacity, approx. kg/h 400
Plate rotating speed n/min 3,5
Single-phase electric motor Kw 0.18
Overall dimensions at floor level mm 1105x1000
Total height mm 800
Weight (without packer) Kg 70
Weight (with packer) Kg 90
Air consumption (packer + drip-stop) l/min 32
1.3
1.31.3
1.3
MACHINE OPERATORS
MACHINE OPERATORSMACHINE OPERATORS
MACHINE OPERATORS
CAUTION!
CAUTION!CAUTION!
CAUTION! FOR SAFETY PURPOSES, THIS MACHINE SHOULD BE USED BY SKILLED STAFF ONLY, AWARE OF
THE INSTRUCTIONS CONTAINED IN THIS MANUAL WHICH FORMS AN INTEGRAL PART OF THE MACHINE.
Basic technical and mechanical skills are required to correctly operate the machine and carry out maintenance
and basic servicing.
1.4
1.41.4
1.4
DIRECTIONS / R
DIRECTIONS / RDIRECTIONS / R
DIRECTIONS / RECOMMENDED AND NOT RECOMMENDED USE
ECOMMENDED AND NOT RECOMMENDED USEECOMMENDED AND NOT RECOMMENDED USE
ECOMMENDED AND NOT RECOMMENDED USE
This machine should be exclusively used for honey packing.
The maximum number of filling jars (evenly arranged on the rotating plate) should not exceed 100 kg.
To Next Page
Loading...