19
TV Setup
TV Channel Setup &
Channel Auto Scan
Select antenna options and perform Channel Auto Scan to receive television channels that will be stored into the TV
tuner memory.
To enter TV Mode:
Press the MENU button
Using the WX arrow buttons; scroll to highlight Channel mode
Press the down T arrow button to highlight Air / Cable
Select Cable if you subscribe to a pay television service without a set top box.
Press the WX arrow button to highlight Cable.
Press the T arrow button to select Auto Scan. Press ENTER and Cable System will be displayed next.
NOTE: Channel Auto Scan may take several minutes to complete.
Cable Mode
Air Mode
Select Air when TV is connected to an indoor / outdoor antenna.
Press the WX arrow button to highlight Air.
Press the T arrow button to select Auto Scan. Press the X right arrow button twice to start Channel Auto Scan.
NOTE: Channel Auto Scan may take several minutes to complete.
NOTE: For cable or satellite
Users without an indoor / outdoor TV antenna, there is no need to run Channel Auto Scan. Connect your cable or satel-
lite set top box to one of the available inputs on the TV for viewing. See page 13-15 for connection details.
Next
Next
Select Move Exit
e
Auto Scan
Favorite
Show/Hide
Channel List
Channel Number
Channel Label
7-2
KABC-SD
Air/Cabl
Air
Total Found
Select Move Exit
e
Auto Scan
Favorite
Show/Hide
Channel List
Channel Number
Channel Label
7-2
KABC-SD
Air/Cabl
Air
Total Found
To Next Page
Loading...
Need help?
General
