Legend Pontoon Series User Manual

11
Reverse trailer into water
leave approx. 18” of the
bunks out of the water.
Ensure engine is tilted up
enough as not to contact
the bottom.
HERE ARE SOME ADDED REMINDERS.
Note: Prior to loading your boat, it is common courtesy to prepare your boat for loading away from the ramp
especially during busy periods.
Shut engine o Flip the bench, fold top Remove any obstacles
before trimming to avoid
damage to outboard.
Advance slowly onto trailer
keep the bow nose between
the bunks and accelerate
onto the trailer
Attach the winch strap
and safety chain.
LOADING YOUR BOAT
1.
2.
3.

Legend Pontoon Series Specifications

General

Engine	Outboard
Category	Pontoon Boat
Tube Diameter	25 inches
Max Capacity	Varies by model (refer to specific model specs)
Motor Capacity	Varies by model (refer to specific model specs)