LEGRAND HA7000 - Adding Qmotion Shades; Prior to Adding Shades; Adding Shades

Page 42
301 Fulling Mill Road, Suite G ©Copyright 2015 by Legrand,
Middletown, PA 17057 Inc All Rights Reserved.
(800) 321-2343 www.legrand.us
6.4 Adding QMotion Shades
6.4.1 Prior to Adding Shades
Prior to commissioning the Intuity system, the QMotion shades must be pre-configured using the
QMotion Qube Coordinator. For best functionality, the shades should be controllable using the
QMotion Qube app.
NOTE: The QMotion Qube app is only available as an iPhone app download. There is no
iPad version of the app available and it will not appear in a search if the parameters are set
for only iPad apps.
If you have questions concerning the configuration of the QMotion Shades using the Qube
Coordinator, please contact QMotion Technical Support at 877-849-6070.
6.4.2 Adding Shades
Begin by opening the Intuity app. Select the “Shades” icon from the main screen.
If the QMotion shades have been properly configured prior to Intuity being commissioned, all of
the previously configured shades should appear automatically.