Important Notices!
Thank you for choosing LEGRAND UPS System to supply your Critical Application.
This manual contains important information about commissioning, usage and technical properties of the
UPS. It also contains safety information for operator and instructions to secure your critical load. Applying
the recommendation detailed in this manual is necessary to use UPS safely and correctly.
The manufacturer reserves the rights to change the technical specications
and design without notice.
LEGRAND reserves the rights to change the information in this document
without notice. Refer to http://ups.legrand.com/ web site to dowload last
release and translations.
Units that are labelled with a CE mark comply with the Standard: EN 62040-1 and EN 62040-2.
Read the manual completely before working on this equipment!
Keep this manual in UPS’s front cover’s pocket for easy consultation!
Reproduction, adaptation, or translation of this manual is prohibited without prior
written permission of LEGRAND Company, except as allowed under the copyright laws.
54
You may choose the language package installed in
UPS.
When you touch the save icon key, a conrmation
pop-up bar will appear. You should touch Ye s to save
the settings. Touch No to exit without saving the
changes.
When you touch the save icon key, a conrmation
pop-up bar will appear.
You should touch Yes to save the settings. Touch No
to exit without saving the changes.
You may see UPS status here. There are 17 dierent
notications.
When you touch the calendar icon; you may reach
below Event Menu.
7.2.4. Diagnostics Menu
All the alarms/notications are logged real-time and can be reached via this menu.
UPS displays up to 380 last events. Events are stored in EEPROM using FIFO method. Order number of last
occurred event is 001, the oldest event is erased.
You may touch right/left arrow through the menu pages. When you touch any event log, you may reach
the details of it.
Set the date and time of UPS during pre-setting.
To Next Page
Loading...
Need help?
General