LEGRAND Radiant Series Installation Guide

4
what you need
REQUIRED:
Phillips-head screwdriver
Flat blade screwdriver
YOU MAY ALSO NEED:
Non-contact voltage tester, pliers, wire cutter, wire stripper, electrical tape,
flashlight, radiant
®
screwless wallplate (included), wiring leads (included), and
wire nuts (included)
NOTE: Exercise caution when using power tools. Overtightening the screws can
damage the device.

LEGRAND Radiant Series Specifications

General

Type	Single-Pole/3-Way/4-Way/Dimmer/Fan Speed Control/Timer
Series	Radiant
Brand	Legrand
Voltage	120V
Certification	UL Listed
Finish Options	White, Light Almond, Black
Mounting	Wall mount
Amperage	15A