before you start
Review this guide in its entirety. Consult an electrician with any questions or if
you are unsure of your abilities.
Caution: To reduce the risk of injury and/or overheating and damage to
other equipment:
• Connect the smart plug-in switch to a 120 VAC, 60 Hz power source ONLY.
• To reduce the risk of electric shock, this equipment has a grounding type
plug that has a third (grounding) pin. This plug will only fit into a grounding
type outlet. If the plug does not fit into the outlet, contact a qualified
electrician to install the proper outlet. Do not change the plug in any way.
• Before installation, ensure there is sufficient Wi-Fi signal strength of at
least two bars. Using a smartphone or tablet on the same Wi-Fi network,
go to the device intended location and check signal. If signal is weak, you
may need a Wi-Fi Extender.
For installation support visit:
www.legrand.us/radiant/smart-lighting/support.
To Next Page
Loading...
