10
Lehle Mono Volume as a classic volume
pedal
The main purpose of the Lehle Mono Volume
certainly is adjusting the volume of the connected
instrument. The DIR output can be used for a tuner
to silently tune the instrument with the VOL output
volume turned down. Of course, this output can
remain free.
Device connection:
Input (1) → Instrument
Output DIR (2) → Tuner or nothing
Output VOL (4) → Amp, mixer
How to do this:
1. Connect your instrument to the input jack (1) of
the Lehle Mono Volume.
2. Connect a tuner to the jack named DIR (2) or
leave this input vacant.
3. Connect the VOL jack (4) to the input of your
amp.
4. Adjust the maximum volume using the gain
control (3).
5. There you go!
To Next Page
Loading...
