Lehle Mono Volume User Manual

11
Lehle Mono Volume with two amps With this setup you can blend your original
sound with the sound of a second amp. The amp
connected to the DIR out is always on, while the
second amp can be faded in and out smoothly via
the VOL out. Using the Lehle P-Split II, as shown
here between the VOL output and the second
amplifier is optional. In case ground loops or
phase cancellations occur, these will be eliminated
effectively by using the Lehle P-Split II.
Device connection:
Lehle Mono Volume
Input (1) → Instrument
Output DIR (2) → Amp 1
Output VOL (4) → Amp 2
Lehle P-Split II
Input → Output VOL (4)
ISO Out → Amp 2
How to do this:
1. Connect your instrument to the input jack (1) of
the Lehle Mono Volume.
2. Connect the amp that shall be always on to the

Lehle Mono Volume Specifications

General

Brand	Lehle
Model	Mono Volume
Category	Music Pedal
Language	English