Group 7 Data/Programming Page 126
Release R2.0 LEIBINGER JET3
Press on the tab <Date/Time> (2) to select the tab.
Press on the arrow key of the Drop-down list <Date format> (3) to define the
format. A drop-down list opens.
Now select the requested format.
Press the button <OK> (4) to take over the changes.
For changing the date format you have to shut down the
complete system and initialize it again!
A security query (5) is faded-in if you would like to continue with the process.
Press the button <No> (6) to abort the process or press the button <Yes>
(7) to save the change.
Now the device will be shut down automatically and will be rebooted again.
The LEIBINGER JET3 will be shut down and the bootmanager (8) is started.
The progress of the initialization is displayed by a bar. After finishing the
process the device is switched to the standby-mode (display is dark) and the
JET3 is now ready for operation again.
To Next Page
Loading...
