Leibinger Jet 3 - Page 138

Group 7 Data/Programming Page 136
Release R2.0 LEIBINGER JET3
2. Input of the licence key (Step 2):
To activate the „Remote Control“-function in the printer, you have to enter the
licence key.
You have to enter the key in the input field <Key-Code>, which consists of 4-
digits input blocks.
ATTENTION
For the input there is no differentiation between capital letters and
small letters!
If the input has been started all six input blocks have to be filled.
There is no possibility to abort the program!
The entered licence key can be kept for a software update!
Proceeding:
 Press on the tab <Remote screen> (2) to select the tab.
 Click in the 1. input block (4.1) of the setting field <Key-Code> (4). A
keyboard field (5) opens automatically and a cursor flashes in the first input
block (4.1).
 Enter the first 4 characters of your licence key.
INFORMATION
You will find further information regarding the operation with
keyboard in the chapter Keyboard!
 Enter the first 4 characters of your licence key. After input the program
activates automatically the next input block. Continue this input as long as the
complete licence key has been entered. After the last input the keyboard field
will be closed automatically and the button <Set> (6) is displayed.
 Press the button <Set> (6). A check of the entered code is now carried out.
The status of the licence key is shown on the accordant display field (3).
Additional information
Display color
Description
Key-Code is missing
or wrong!
red
None or wrong licence key has been
entered.
Key-Code is correct!
green
Licence key is correct.