Group 7 Data/Programming Page 155
Release R2.0 LEIBINGER JET3
7.4.3.4 Piezo test and charge test
You will find further informations in the separate document Service
manual!
Dangerous voltage exists in the print head!
The jet adjustment can only be carried out by authorized
staff or Leibinger service technicians!
Risk of fire and injury!
Inflammable! Combustible gases and liquids cause serious burns.
Sources of ignition must be kept away from the print head!
Ink escapes from the head aperture. Spraying of ink into the eyes
can cause blindness. Eye protection is necessary!
Upon contact the contents causes skin irritation. Protective
equipment is necessary!
This function provides a support for a required correction of the jet position.
Required tools and facilities:
Magnifier (Sixfold lens)
Allen key 1,5 mm
Do not use a ball head-allen key because it can cause damages at the
screw heads!
To Next Page
Loading...
