Leibinger Jet 3 - Page 208

Group 7 Data/Programming Page 206
Release R2.0 LEIBINGER JET3
7.5.7.2 Structure
Figure 103
Explorer (Layout)
1 – Button <Edit>
5 – Drop-down list <Filter>
2 – Direct buttons <Tools>
6 – Drop-down list <memory device>
3 – Selection window <Harddisc>
7 – Button <Close>
4 – Selection window <Ext. memory>
 <Edit> Button (1) and direct buttons [icons] (2): With the button or with the
icons you can select the tools of the explorer.
 Selection window <Harddisc> (3): In the selection window the data or the
filtered data of the internal memory of the JET3 are displayed.
 Selection window <External memory> (4): In the selection window the data or
the filtered data of the external data carrier which have been selected in the drop-
down list <memory device > are displayed.
Annotation: A selection window is activated by clicking on the display area of the
window. The active window is marked by a turquoise border.
6
4
2
5
1
3
active
selection window
7