Leibinger Jet 3 - Deleting Jobs via Explorer

Group 7 Data/Programming Page 207
Release R2.0 LEIBINGER JET3
 Filter (5): With the drop-down list you can select the several data fields which
should be displayed or processed. If a filter has been used, only the accordant
data is shown in the two selection windows.
The following filters are available:
 All
 Jobs
 Fonts
 Graphics
 Joblists
 Memory device (6): With the drop-down list you can select the external data
carrier.
 The button <Close> (7) closes the explorer.
7.5.7.3 Explorer tools
With the button <Edit> you can select the explorer tools. Further more most of the
tools can be selected directly with the available icons (direct buttons).
Figure 104
Explorer (Tools)
1 – Button <Edit>
5 – Tool <Select None>
2 – Tool <Copy to Device>
6 – Tool <delete>
3 – Tool <Copy to Harddisc>
7 – Tool <Clone Harddisc>
4 – Tool <Select all>
8 – Direct buttons (Icons)
1
2
3
4
5
8
or
2
3
4
5
7
6
6