Group 7 Data/Programming Page 213
Release R2.0 LEIBINGER JET3
The following system information are displayed in the window:
Oscillator frequency of the device (5)
The ink which has been filled in the device (6)
The nominal values and the current actual values of the hydraulic system (7)
The JET3 version number, the serial number of the device and the software
versions (8)
The operation hour counter and information for inspection (9)
The drop break off curve (10) [if available]
With the button <Export> (11) you can save the system information on an external
memory device (e.g. USB-stick).
The button <Close> (12) closes the window.
The displayed system information can be swaped out to an external memory device
(USB-stick).
Plug an USB-Stick in the USB-socket (1) on the back of the device.
Press the button <Export> (2).
The data is saved on the connected medium and the Message (3), that the
process has been carried is faded in. The memory happens with the designation
„info_LJ3-(“serial number of the printer”).txt“.
Finally confirm the message with the button <OK> (4).
Comment: If no storage medium (memory device) is connected, the Message (5)
is faded in. Confirm the message with the button <OK> (6). Connect
a memory device and repeat the complete process.
To Next Page
Loading...
