Leibinger Jet 3 - Job Editor Tools; Edit Tools in the Job Editor

Group 8 Job editor Page 215
Release R2.0 LEIBINGER JET3
8. Job editor
The printing data is created and saved as a job in the job editor. A variety of Windows®
similar tools make the operation easier. A job can consist of a lot different objects e.g.
text blocks, graphics or barcodes whose contents and characters are changeable.
Functions as matrix, size, bold type, rotation etc. can be assigned to every single object
irrespectively of each other. Current jobs can be edited or created new also during running
production. All jobs are displayed in the WYSIWYG mode.
Note:
WYSIWYG = What you see is what you get (real display of print image)
8.1 Structure
 Menu bar (1): With the buttons in the menu bar you can select the accordant
submenus of the editor. The following submenus are available:
 Job
 Insert
 Format
 Edit
 Settings
 View
 Direct buttons (2+3): With the direct buttons (Icons) you can select the creation-
and editing tools directly.
You will find further information regarding these tools in the following chapters.
 Direct button <Object settings> (4): With the direct button (Icon) you can assign
several object settings (e.g. font, contrast, alignment etc.) to the selected printing
element.
 Font selection (5): With the drop-down list you can change a font for a new
created element or for a selected element.
 Orientation (6): With the drop-down list you can change the orientation
(alignment) of an element.
 Zoom (7): With the drop-down list you can change the zoom factor of the
elements in the display area <Print image> (8) to make the process easier.
 Display area <Print image> (8): In the display area the created printing data is
displayed in the WYSIWYG-mode.