Leibinger Jet 3 - Position Settings for Objects; Bold Level (Bold Text) Configuration

Group 8 Job editor Page 230
Release R2.0 LEIBINGER JET3
The following settings can be carried out:
Pos.
Object settings
Note
1.
Font selection
Not available for barcodes and graphics
2.
Contrast value
3.
Position X/Y
4.
Orientation
5.1
Display mirrored
5.2
Display inverted
5.3
Display alternating
5.4
Display proportional
Not available for barcodes and graphics
6.
ICG-value
Not available for barcodes and graphics
7.
Bold level
Not available for barcodes and graphics
8.
Settings Counter assignment
9.
Use as prompt field
8.4.1 Font selection
With the drop-down list <Font> you can assign the requested font to the printing
element.
Figure 121
Object settings (Font selection)