Group 8 Job editor Page 244
Release R2.0 LEIBINGER JET3
8.5.1.3 PrintGo-repetitions
The setting defines the amount of text outputs (print repetitions) by the set value
between the several text outputs. Values between 0 – 1000 are permitted.
0 = no repetition (single print)
1 = one repetition (double print)
The set value is shown on the accordant display field.
To get an endless repetition of the print outputs, you have to activate the checkbox
<Endless> (2).
1 – Display field <PrintGo-Repeat>
3 – Checkbox <Endless> active
2 – Checkbox <Endless> deactive
To Next Page
Loading...
