Group 8 Job editor Page 284
Release R2.0 LEIBINGER JET3
Description of the date/time settings
The display field (1) shows the content. The content is created with the buttons 2-7
and 12-13. Additionally there are a checkbox for adjusting the left-hand zeros (8) and
control buttons for deleting (11) and the cursor control (14) within the display field
(1). All Settings can either be confirmed with the <OK> button or discarded with
the <Cancel> button.
Basically there are two options to set a date or a time:
The date/ time is set using the current date/time
The date/time is set using an offset for an expiry date
With the first option the current date or time will be displayed and printed.
With the second option the current date or time plus the defined offset will be
displayed and printed.
The navigation within the display field (1) is carried out with the arrow keys (14).
With these buttons you can move the cursor to any position within the display field.
Inputs will happen at the cursor position. So it is possible to insert fields or special
characters within an already existing set of fields and special characters.
With the <Space> button (13) you can create spaces between fields or special
characters. Using the <Backspace> button (11) will delete the field or special
character left to the cursor position.
A time is set by using the buttons for time settings (3). The single fields (hour, minute,
second) may be separated using the special characters but that’s not stringently
required. There are no restrictions regarding the order and the number of the fields
and special characters.
E.g. it is possible to create the following time settings:
HH:MM/SS
HH_SS
SS/SS/HH/HH
There is one thing to regard: it is not possible to place two fields of the
same kind directly in row. In that case a special character has to be set
in between the two fields.
To Next Page
Loading...
