Leibinger Jet 3 - Counter Configuration

Group 8 Job editor Page 289
Release R2.0 LEIBINGER JET3
Point 3
 Now change to the <Date/Time>.
 Press the following buttons (10-13) to create the required date format input:
„Day“  „/“  „Month“  „/“  „Year 2014“
The display field <Content> (8) shows a preview of the date format.
 Press the button <OK> (15) for confirmation and to close the tab or press the
button <Cancel> (16) to leave the tab without saving.
 With the confirmation the date object is inserted into the editing window of the
<Job editor> marked with a red object frame.
 Click on an object to select it. A selected object is marked with a red frame.
Point 4
 Position the date object with the direction buttons of the job editor or use the
drag-and-drop function to move the element.
Approach (part 2) refers to Figure 154
Point 1
 Press the menu item <Insert> (1) and in the drop down menu select the menu
item <Date/Time> (2) or the appropriate direct button (3).
Point 2
 The menu <Global Settings (Date/Time)> is faded in. Carry out the requested
settings for the font parameters and display options on the <Global Settings>
tab.
INFORMATION
You will find further information in the chapter Object settings!
Point 3
 Now change to the <Date/Time> tab by selecting the corresponding tab caption.
 Press the following buttons (10-13) in the appropriate order to create the required
date input:
„Day“  „/“  „Month“  „/“  „Year 2014“
The display field <Content> (8) shows a preview of the formatting.
 Select “days” from the drop-down menu of the <Expiry Date Offset> section
(17).