Group 8 Job editor Page 291
Release R2.0 LEIBINGER JET3
Set the requested expiry date of 15 days. The setting can be carried out
stepwise with the arrow keys (18)
or
by clicking in the display field of the <Expiry Date Offset> section which will
open a number keypad (19) for input.
You will find further information about working with the number keypad
in the chapter Numeric keypad!
Press the button <OK> (15) for confirmation and to close the tab or press the
<Cancel> button (16) to leave the tab without saving.
Point 5
The expiry date object is inserted to the editing window of the <Job editor>
marked with a red object frame (20).
You can select an object by clicking on it. A selected object is marked with a red
frame.
Position the object with the arrow keys of the job editor or use the drag-and-drop
function to move the object in its final position (21).
To Next Page
Loading...
