Leibinger Jet 3 - Number of Digits for Counter; Setting the Start Value for Counter; Initialization Value Configuration

Group 8 Job editor Page 292
Release R2.0 LEIBINGER JET3
8.7.2.2 Carry out replacements
Further more accordant substitutions (numbers, letters or designations) for the date-
and time values can be generated in the tab <Replacements> to get an operating-
specific display or coding of the specifications.
INFORMATION
You will find further information regarding the execution of
substitutions in the chapter Replacements!
8.7.3 Counter
Provides bonding of individual programmable counters as well as definition of counter
parameters, font parameters and display options.
Further more accordant replacements (number or letters) can be generated to get a
operating specific display or coding of the specifications.
ATTENTION
Attention! For leaving a job, the counter states of integrated job
counters are usually not saved, that means if you call up this job again
the counter states are already again on the start value. If the print
should be continued with the already existing counter states you have
to activate the function <Save counter states> in the dialog box
<Extra> in advance.
INFORMATION
You will find further information also in the group Data
entry/Programming in the chapter Save Counter States!