Group 8 Job editor Page 301
Release R2.0 LEIBINGER JET3
8.7.4.2 Compile shift times and integrate shift codes
Example: A shift code should be written additionally to an existing fix text „xxx“.
In the first shift (early shift) at 6.15 am „xxx 001“.
In the second shift (late shift) at 12.15 pm „xxx 002“.
In the third shift (night shift) at 20.15 am „xxx 003“.
Press the button <Insert> (1) and the option <Shift Code> (2) or the accordant
direct button [icon] (3).
The dialog box <Object settings (Shift Code)> is faded in.
In the tab <Global Settings> (4) carry out the requested settings for the font
parameters and display options. You will find further information in the Chapter
Object Settings.
Note:
In the setting fields <Position
X/Y>
(5) the system shows automatically the next possible position of the shift code after the already existing fix
text. This position can be of course changed!
Now change to the tab <Shift Code> (6). The selection of the tab happens by
clicking on the tab bar.
Now mark in the setting field <Shift Times> (7) the hour- or minute block to
change the values. With the accordant <Arrow keys> (8) you can increase or
reduce the values of the marked block (10).
Now click in the setting field <Shiftcode> (9). A keyboard field opens for input.
Now enter „001“.
Press the button <Enter > (11) of the keyboard field. The entered characters
are taken over and are displayed in the setting field.
You will find further information about the usage of the keyboard in
chapter Keyboard!
Now press the button <Add> (12). The settings that have been made are
transferred to the management window (13).
To Next Page
Loading...
