Group 8 Job editor Page 332
Release R2.0 LEIBINGER JET3
The <Replacements> function LEIBINGER JET3 offers the possibility to exchange
date- and time specifications as well as counters by replacements (figures, letters or
designations). Thereby you can get an application-specific display or coding of the
information. The definitions of the replacements are carried out on the respective
<Replacements> tab of the corresponding dialog box. The available options on the
tab depend on the kind of printing element to be replaced.
Replacements can be carried out for date and time specifications as
well as for counters or counters which are integrated in barcodes.
The settings are only valid for the selected printing element! Therefore
it is possible to apply different replacements to different counters or
time/date objects within a job.
On the drop down list <Type> (1) you can select the element type for which
replacements should be generated.
Depending on the selected print object there are different kinds of element types
available (2).
In the display fields <Replacement> (2) the defined replacements are displayed
for the selected element type.
Using the <Scroll> buttons (3) you can scroll through the display fields
<Replacements>.
On left side there is the list with the original settings for the selected element type
(5).
With the button <Default> (6) you can reset the definitions of the replacements
to the standard values.
To Next Page
Loading...
