Group 10 Equipping/Maintenance Page 344
Release R2.0 LEIBINGER JET3
Take out the empty re-filling bottle. The closing valve of the reservoir tank will be
closed automatically.
Finally screw off the sealing cap of the reservoir tank as well as the empty refill
bottle carefully.
After filling the containers (reservoir tanks) as well as the empty refill
bottles, they have to be closed carefully again
Dangerous voltage exists in the print head!
After opening the head cover and turning on the „safety contact
bypass“ on the head, arbitrarly dangerous voltage occurs.
Only authorized staff or Leibinger service technicians can work under
voltage!
Risk of fire and injury!
Inflammable! Combustible gases and liquids cause serious burns.
Sources of ignition must be kept away from the print head!
Ink escapes from the head aperture. Spraying of ink into the eyes can
cause blindness. Eye protection is necessary!
Upon contact the contents causes skin irritation. Protective equipment
is necessary!
Read the safety data sheets and the personal protective equipment
rules and regulations!
To Next Page
Loading...
