Group 7 Data/Programming Page 93
Release R2.0 LEIBINGER JET3
With the option <Open Job to edit> or by pressing on the accordant direct button
(Icon) you can open an existing job for editing. For selection of a job the window
„Job edit“ is faded in.
Press the button <Job> (1) and the option <Open Job to edit> (2) or press the
accordant direct button [icon] (3).
The window <Job edit> (4) is faded in.
Select the requested job in the selection field <Job list> (5). With the drop-down
list <Search in> (6) you can select the various memory locations.
The name of the selected jobs is now shown on the display <Filename> (7).
Additionally a preview of the printing job is faded in on the display <Job
preview> (10).
Press the button <Edit> (12) to take over the selected job or press the button
<Cancel> (11) to cancel the process.
The menu <Jobeditor> (4) opens to change the printing data. The name of the
opened job is displayed in the title bar of the editor.
Carry out the requested changes and save it.
You will find further information regarding the memory process in
the group Jobeditor in the chapter Save job/Save job as.
You will find further information regarding the operation of the job
editor in the group Jobeditor.
To Next Page
Loading...
