Leica BLK360 Release Notes

8/8
Cyclone Field 360 will show an error message when trying to start a scan although the Leica BLK360 is
in warning state. A restart of the sensor as stated in the error message is not required.
As written above, a simple press on the power button solves the issue and the scan can be started.
Please note that to make use of the new functionalities of v2.1.0 a new version of the according
iOS/Android app respectively a new version of Cyclone, Cyclone Register 360 or BLK360 Data Manager
is required.
FIRMWARE INSTALLATION
• For details on how to update the firmware on a Leica BLK360 please read “BLK360 How
to Update the Firmware” manual which is available on Leica MyWorld in the Manuals
section.

Leica BLK360 Specifications

General

Measurement Range	0.6 - 60 m
Scan Speed	360, 000 points per second
Laser Class	Class 1
Thermal Camera	No
Laser Wavelength	830 nm
IP Rating	IP54
Connectivity	USB-C, Wi-Fi
Type	Laser scanner
Accuracy	4 mm at 10 m
Field of View	360° horizontal, 300° vertical
Camera	13 MP
Data Storage	Internal memory
Wireless Communication	Wi-Fi
Operating Temperature	0°C to +40°C
Imaging	High dynamic range (HDR) spherical imaging
Weight	1 kg