Need help?Do you have a question about the Leica BOND-PRIME and is the answer not in the manual?
General| Brand | Leica Biosystems |
|---|---|
| Model | BOND-PRIME |
| Slide Capacity | 30 slides |
| Throughput | Up to 30 slides per run |
| Power Requirements | 100-240 VAC, 50/60 Hz |
| Software | BOND software |
| Operating Humidity | 20-80% non-condensing |
| Type | Automated IHC & ISH Stainer |
| Weight | 220 kg |
| Operating Temperature | 18-30°C |
Trademarks and copyright information for the manual.
Document number and manufacturer details.
General user information and website.
Defines target audience and required training.
Guidelines for installation, repairs, and incident reporting.
Statement on personal data security and privacy.
Describes the system's use in diagnostics.
Details FCC and CE mark compliance.
Compliance with IVD standards.
Explains regulatory symbols used on product labeling.
Symbols for medical device labeling as per ISO 15223-1.
Graphical symbols for equipment.
Various regulatory marks and directives.
Disposal guidelines for electronic waste.
Hazardous substance limits and recycling info.
Compliance marks and testing agency certifications.
Specifications for humidity and port status.
Graphical symbols for safety signs per ISO 7010.
Notifications of hazards and safety precautions.
Guidelines for correct instrument operation.
Overview of the BOND System components.
Detailed description of the processing module.
Description of the module's hood components.
Description of slide loading/unloading drawers.
Visual representation of the module's front.
Visual representation of the module's rear.
Interface for controlling the module.
Window for observation and scanner for reagents.
Module power control and hood operation handle.
Drawer for loading slides.
Drawer for unloading slides.
Inserts for holding slides in drawers.
Components for waste drainage and extraction.
Trays for holding reagent containers.
The main platform for reagent trays.
Containers for DI water, alcohol, and solutions.
Containers for bulk and hazardous waste.
Identifies reservoirs for DI water, vacuum, waste, etc.
Holds up to 5 reagent containers.
Holds up to 10 reagent containers.
Robot for slide handling.
Robots for washing ARC modules.
Modules for staining and washing/priming.
Reagent mixing and slide preparation stations.
Robot for slide handling and wash robots.
Modules for staining and washing/priming.
Reagent mixing and slide preparation stations.
Components for slide identification and gripping.
Probes for dispensing reagents.
Connectors and ferrules for tubing.
Springs and probes for reagent dispensing.
Wash robot for ARC Modules Bank A.
Wash robot for ARC Modules Bank B.
Latch and cover for accessing ARC modules.
Lid and cover for ARC module wells.
Station for priming bulk probes.
Wash stations for robots and probes.
Procedures for user login and logout.
Interface for navigating between screens.
Displays the module's current status.
Manages system messages and alerts.
Steps to log into the touchscreen interface.
Shows loaded slides status.
Shows slides currently processing.
Shows completed slides.
Button to access the action queue.
Managing the display of system messages.
Executing tasks from the action queue.
Hiding the alert banner.
Visualizing slide locations in the drawer.
Visualizing slides by case.
Visualizing slide locations in the unload drawer.
Visualizing slides by case in the unload drawer.
Displaying details for individual slides in a case.
Procedure to stop a slide processing.
Steps to prepare reagent containers and trays.
Visual examples of reagent system icons.
Visual examples of container icons.
Overview of the quick start chapter.
Steps to power on and initialize the module.
Loading reagents and detection system.
End-to-end slide processing workflow.
Guidelines for routine maintenance.
Procedure to refill DI water.
Procedure to refill alcohol.
Procedure to refill tracked containers.
Reminders for preventative maintenance.
Schedule for cleaning tasks.
Cleaning the inserts in the slide drawers.
Cleaning waste drains and sumps.
Cleaning the pickup tube and filter.
Reasons for initialization failure.
Troubleshooting network connection issues.
Procedures for manual slide retrieval.
Procedures for removing slide fragments.
Retrieving slides from drawers.
Details about system components and software.
Dimensions, weight, and clearances.
Power requirements and UPS.
Operating temperature, humidity, and altitude.
Details on slide label dimensions.
To Next Page
