Need help?Do you have a question about the Leica CV5030 and is the answer not in the manual?
General| Brand | Leica |
|---|---|
| Model | CV5030 |
| Category | Laboratory Equipment |
| Language | English |
Explains warning, note, flammable, hot surface, numbering, and function key symbols.
Specifies that only trained personnel should operate the instrument.
Defines the instrument's purpose and accessory compatibility.
States that information applies to the instrument type on the cover page.
General safety guidelines, protective devices, residual risks, and original parts usage.
User responsibility for safe operation, transport, installation, and working with the instrument.
Visual identification of major instrument parts with labels for understanding.
Lists technical specifications like voltages, dimensions, weight, and environmental ranges.
Lists the basic instrument and dispenser group components included in the delivery.
Specifies environmental, space, power, and ventilation requirements for instrument placement.
Instructions for opening the package, removing transport anchors, and placing the instrument.
Tasks for commissioning, including installing dispenser group, needle alignment, and accessories.
Overview of the control panel's keyboard, LEDs, and LCD display for operation.
Explains control buttons (START, PAUSE, STOP, LIFT) and operational steps like on/off, inspection.
Step-by-step guide for performing coverslipping and handling interruptions.
Explains display messages, their causes, and required actions for monitoring and troubleshooting.
Guides on programming, setting parameter sets (Menu A/B), and fine-tuning settings for optimal results.
Describes connecting the CV5030 to Leica ST5010/ST5020 staining machines.
Key considerations for workstation setup and operation, including slide handling and magazine management.
How to interrupt or resume workstation processes, including power failures.
General precautions and guidelines for instrument cleaning and maintenance.
Checklist for daily cleaning tasks, including chutes, cleaners, vials, baths, and magazines.
Tasks for weekly cleaning and maintenance, including dispenser group, brushes, and slide holders.
Procedures for cleaning when needed, such as refilling carbon filter or checking transfer stations.
Steps for changing cover slip mountant, including switching between xylene-based and substitute types.
Lists error codes, their causes, and recommended troubleshooting steps for instrument issues.
Guides users through resolving issues like air bubbles, incorrect mountant application, or slide gripping failures.
Lists part numbers and descriptions for ordering accessories like needles, magazines, and holders.
Details the warranty scope and terms provided by Leica Biosystems.
Contact information and required details for requesting technical support or spare parts.
Guidelines for instrument shutdown and disposal according to local regulations.
Notes on handling and maintaining Leica plastic slide holders, magazines, and accessories.
Warranty and usage recommendations for non-Leica slide holders and required bath inserts.
Information about the gripper mechanism and compatible specimen slide edge properties.
List of validated specimen slides and their properties for optimal performance.
Recommendations for cover slip types and storage conditions to prevent sticking.
Information on Leica Universal Label and Cognitive Cxi labels for specimen slides.
To Next Page
