Do you have a question about the Leica CM3600 XP and is the answer not in the manual?
Specimen Cooling | Yes |
---|---|
Section Thickness Settings | 0.5 µm increments |
Horizontal Specimen Stroke | 25 mm |
Vertical Specimen Stroke | 60 mm |
Specimen Orientation | Horizontal and vertical |
Section Thickness Range | 0.5 μm to 100 μm |
Power Supply | 230 V, 50/60 Hz |
Microtome Type | Rotary Microtome |
Specifies that only trained laboratory personnel may operate the Leica CM3600 XP.
Defines the intended applications of the Leica CM3600 XP and warns against improper use.
Presents detailed specifications including microtome type, dimensions, weight, and electrical connections.
Explains the operational principles of the motor-driven specimen sledge and sectioning process.
Provides essential instructions for operational safety and maintenance of the instrument.
Highlights the responsibilities for accident prevention and general operating instructions.
Details important safety features like the emergency stop switch, knee lever, window, and cryochamber.
Covers crucial safety directives for instrument setup, operation, and handling of accessories.
Explains the steps for starting the software and logging into the system with user credentials.
Details the different areas of the software interface, including title bar, tool bar, work space, and status bar.
Outlines the mandatory initialization procedure to prepare the microtome for operation after start-up.
Describes the primary operational window, detailing its various sections like chamber temperature, knife movement, and sectioning program.
Covers the configuration of various instrument parameters, including temperature, speed, and user settings.
Step-by-step instructions for powering on the instrument, socket panel, and PC.
Guides on launching the software and performing the necessary initialization if the instrument was fully switched off.
Guides on selecting sectioning parameters and the procedure for sectioning and collecting specimens.