EasyManua.ls Logo

Leica Flexacam C3 User Manual

Leica Flexacam C3
45 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Flexacam C3
Microscope Camera
User Manual
Question and Answer IconNeed help?

Do you have a question about the Leica Flexacam C3 and is the answer not in the manual?

Leica Flexacam C3 Specifications

General IconGeneral
Sensor TypeCMOS
InterfaceUSB 3.0
Mount TypeC-Mount
Frame Rate30 fps at full resolution
Operating SystemWindows, Linux, Mac OS
ApplicationMicroscopy
Software CompatibilityLAS X
Bit Depth12-bit

Summary

General Notes and Safety Guidance

Safety Concept Information

Read the 'Safety Concept' booklet for additional information on handling and care.

Cleaning and Care Instructions

Do not use unsuitable cleaning agents or chemicals for cleaning.

Servicing and Repair Guidelines

Repairs must only be carried out by Leica Microsystems-trained service technicians.

Operator Responsibilities and Safety

Ensure the camera is operated, maintained and repaired by authorized personnel.

Important Safety Documentation Notes

Understanding Safety Symbols

Safety Instructions

Intended Use Guidance

Refer to 'Safety Concept' booklet for details on intended and non-intended use.

Place of Use Recommendations

Refer to 'Safety Concept' booklet for guidance on the place of use.

Responsibility of Camera Operator

Ensure camera operation, maintenance, and repair by authorized personnel.

Repairs and Service Work Procedures

Product Transport Safety

Health Risks and Ergonomics

Camera Safety and EMC Compliance

EMC Precautions and Environment

End User License Agreement (EULA)

Introduction

Real 4K Display Capabilities

Integrated HDMI output allows display on HD-capable monitors at various resolutions.

On-Screen Display (OSD) Functionality

Provides stand-alone functionality with a graphical user interface on the microscope image.

Leica Application Software X (LAS X)

Includes a quickstart guide with a download link for the latest LAS X software.

Assembly

Camera Assembly Instructions

Instructions for mounting the Flexacam C3 onto a microscope using a C-mount adapter.

Installation

Stand-Alone Mode Cable Connections

Connects the Flexacam C3 to a power socket and HD/4K monitor using HDMI.

Startup Procedure

Switching On the Flexacam C3

Procedure for turning on the Flexacam C3 in stand-alone mode, including status LED indicators.

Operation (Stand-Alone Mode)

Stand-Alone Mode Operation

Information on setting up and switching on the Flexacam C3 in stand-alone mode.

Operation (PC Mode)

PC Mode Operation

Information on setting up and switching on the Flexacam C3 in PC mode, including parallel monitor use.

Troubleshooting

Troubleshooting Stand-Alone Mode

Addresses issues like no image display in stand-alone mode and provides a camera reset procedure.

Camera Recovery Mode

Procedure for recovering the camera if the application image is corrupted or firmware update fails.

Care and Maintenance

Care, Maintenance, and Contacts

General care tips, warranty benefits, contact address, and protection from dirt and chemicals.

Spare Parts and Accessories

Lists Leica article numbers and designations for spare parts and optional sales items.

Product Disposal Guidelines

Specifications

Technical Data and Specifications

Provides detailed technical specifications for the digital camera and electronic interfaces.

Dimensional Drawings and Dimensions

Illustrates the physical dimensions of the Flexacam C3 camera in millimeters.

Related product manuals