Need help?Do you have a question about the Leica CM1510S and is the answer not in the manual?
General| Power Supply | 100 - 240 V, 50/60 Hz |
|---|---|
| Specimen Cooling | Yes |
| Motorized Specimen Feed | Yes |
| Microtome Type | Rotary |
| Section Thickness | 1 - 60 μm |
| Cryochamber Temperature | -35°C to +50°C |
| Defrost | Automatic |
| Cooling System | Compressor-based |
Outlines the required training and familiarity for operators.
Provides general safety guidelines and maintenance information.
Highlights potential hazards during operation, installation, and maintenance.
Describes handwheel locking and knife guard mechanisms.
Specifies environmental and space conditions for instrument placement.
Covers power connection, initialization, and pre-operation checks.
Steps for freezing specimens using the quick-freeze shelf.
Procedures for cutting, adjusting thickness, and moving specimens.
Explains automatic and manual defrosting for the cryochamber and quick-freeze shelf.
A comprehensive guide to diagnosing and fixing common operational problems.
Explains error codes and their corresponding causes and solutions.
To Next Page
