Need help?Do you have a question about the Leica DM IRB and is the answer not in the manual?
General| Brand | Leica |
|---|---|
| Model | DM IRB |
| Category | Microscope |
| Language | English |
Identifies and names main microscope parts and accessories.
Describes the different basic versions and configurations of the DM IRB stand.
Covers tube mounts, tubes, and IR/R tube adapters for image formation and connectivity.
Details brightness adjustment, aperture diaphragm, condensers, and illumination units.
Lists specimen stages, accessories, objective nosepieces, and eyepieces.
Explains the function of filters, field diaphragms, and lamphousings.
Specifies environmental conditions and provides unpacking instructions.
Covers assembly of illumination columns, condensers, and prisms.
Guides assembly of lamp mounts, housings, fluorescence modules, and related optics.
Details mounting procedures for various observation tubes and adapters.
Explains how to adapt slide overlay and macro devices onto specific tubes.
Covers assembly of plane, 3-plate x/y, and rotary stages with object guides.
Introduces the electronic (E) version and its features.
Guides entering and navigating the learn mode for objective and prism configuration.
Details installing objectives, learning magnification, phase contrast, and IC prisms.
Explains Dry/Immersion modes and learning parfocality for objectives.
Covers individual user adjustments and installing fluorescence filter cubes.
Describes the electronic control for changing objective magnification.
Explains the Dry and Immersion operating modes and how to switch between them.
Details brightness adjustment and the electronic focusing system's features.
Covers the control unit, its connection, and the function of its keys.
Guides on performing fluorescence observation, including filter selection and illumination.
Covers brightfield illumination, condenser, aperture, and field diaphragm settings.
Details the procedures for phase contrast and darkfield microscopy.
Explains the setup for polarisation and transmitted light interference contrast.
Provides methods for centering various lamp types in lamphousing units.
Covers the use of slide overlay and macro devices for image enhancement and documentation.
Explains how to perform length measurements using graticules and calibration methods.
Details camera connections and beamsplitting options for image recording.
Explains the principle behind LMC and lists its system components.
Guides the assembly and adjustment procedures for the LMC system.
Discusses specific applications where LMC is particularly suitable.
Provides guidelines for cleaning the microscope, its optics, and surfaces.
Details cleaning objectives, removing immersion oil, and handling chemicals.
Identifies common electric and mechanical errors and their initial checks.
Provides detailed steps for replacing halogen, Hg, and Xe lamps in various lamphousings.
Guides on replacing the mains fuse on the power unit.
Provides recommendations for storing the microscope to protect it from dust and maintain optimal conditions.
Advises on using original packaging for shipping and transport.
Explains objective lettering, types, and performance classes.
Provides performance data for eyepieces and tubes, including field of view and diameter.
Lists performance data for light filters and specifications for condensers.
Provides performance data for stages and lamphousing units.
Lists general technical specifications for the microscope and its power unit.
To Next Page
