Need help?Do you have a question about the Leica DM4000M and is the answer not in the manual?
General| Brand | Leica |
|---|---|
| Model | DM4000M |
| Category | Microscope |
| Language | English |
Discusses safety class 1 device and user responsibilities for safe operation.
Provides general specifications for electrical safety of the CTR5000 box and microscope.
Compares imaging procedures (transmitted, incident light) for different microscope models.
Details specifications for the transmitted light axis of the microscope models.
Details specifications for the incident light axis of the microscope models.
Details specifications of the objective nosepiece for different microscope models.
Details specifications of the X/Y stage for different microscope models.
Details specifications of the tube for different microscope models.
Details specifications of the condenser for different microscope models.
Details specifications of the magnification changer for different microscope models.
Lists features of the control panels for the microscope models.
Specifies the computer interface used with the microscope.
Lists software tools available for the microscope.
Specifies environmental conditions and precautions for the installation location.
Provides instructions for disassembling and packaging components for transport.
Instructions for assembling the mechanical object stage onto the microscope stand.
Instructions for inserting and connecting the condenser into the condenser holder.
Instructions for mounting the tube and inserting eyepieces onto the microscope.
Instructions for mounting objectives onto the objective turret.
Instructions for installing the 107/2 lamp housing for the transmitted light axis.
Instructions for installing the 106 z lamp housing for the incident light axis.
Instructions for inserting filter and reflector cubes into the incident light turret.
Instructions for installing transmitted light and incident light polarizers and analyzers.
Instructions for inserting objective prisms for DIC.
Describes optional accessories like Ergomodule, Mirror Housing, Booster Lens, Excitation Manager.
Instructions for connecting the microscope stand to the power supply.
Instructions for connecting the microscope to the CTR5000 electronics box.
Explains the basic functional principles of the microscope and its controls.
Provides step-by-step instructions for switching on the microscope.
Explains the microscope display and its indications after initialization.
Explains Köhler illumination and pre-set values for diaphragms.
Provides steps to check and level phase contrast light rings.
Instructions for adjusting transmitted and incident light sources.
Steps for switching on the microscope, including gas discharge lamps.
Instructions for lengthening the coaxial pinion and adjusting torque.
Instructions for revolving the stage and its range.
Explains the use of focus dials for coarse and fine adjustment.
Instructions for adjusting viewing distance, angle, and eyepiece extension.
Explains beam splitting for different photo tube types.
Instructions for fitting eyepieces, including those with inlaid reticles and vision correction.
Instructions for rotating objectives into place and automatic recognition.
Explains the use of the coded magnification changer.
Details how to set brightness for transmitted, incident, and fluorescence light sources.
Explains how to change aperture and field diaphragm settings.
Steps for bright field imaging using transmitted light.
Steps for phase contrast imaging using transmitted light.
Steps for dark field imaging using transmitted light.
Steps for polarization imaging using transmitted light.
Steps for DIC imaging using transmitted light.
Steps for fluorescence imaging, including intensity and filter cube selection.
Steps for bright field imaging using incident light.
Steps for dark field imaging using incident light.
Steps for polarization imaging using incident light.
Steps for interference contrast imaging using incident light.
Steps for bright field imaging using transmitted light.
Troubleshooting issues related to the microscope stand not responding.
Troubleshooting issues with dark or uneven illumination.
Troubleshooting issues with focusing in bright field.
Troubleshooting issues with achieving definite DF contrast.
Troubleshooting issues with obtaining phase contrast.
Troubleshooting issues with polarization contrast.
Troubleshooting issues with dark or weak fluorescence.
Troubleshooting issues with the display flashing or showing "FAIL!".
Instructions on using and handling the dust cover.
General cleaning instructions for the microscope, stage, and glass surfaces.
Specific instructions for cleaning microscope objectives.
Procedures for removing immersion oil safely.
Precautions for handling acids and bases near microscope parts.
To Next Page
