Leica M-series User Manual 41
Graticules
2. Clamp the graticule on the insert, applying
moderate pressure. Ensure that the grati-
cule ts tightly.
3. Screw the insert and graticule rmly into
place and replace the eyepiece in the tube.
4. You can now align the graticule by rotating
the eyepiece in the tube and then tighten-
ing it using the clamping screw.
Use
Leica graticules make length measurements
and counting easier, particularly for work-
stations that are not equipped with a digital
camera and LAS software.
The Leica graticules for length measurements
and numbering are tted in mounts and are
inserted into the eyepieces.
1. Screw the insert o of the eyepiece.
To Next Page
