Need help?Do you have a question about the Leica PROVEO 8 and is the answer not in the manual?
General| Type | Stereo Microscope |
|---|---|
| Waterproof | No |
| Camera | Optional digital camera |
| Display | Integrated or external monitor |
| Lighting | LED illumination |
| Application | Industrial quality control, materials science, electronics inspection, forensic science, research and development |
| Contrast Methods | Brightfield, darkfield |
| Ergonomics | Adjustable viewing angle |
Outlines responsibilities for instrument setup, operation, and maintenance.
Provides instructions for safe operation and lists potential hazards.
Lists various hazards associated with using the surgical microscope.
Describes the electromagnetic brakes used to secure the microscope's position.
Details the controls and components of the PROVEO 8 optics carrier with IVC module.
Details the controls and components of the PROVEO 8 optics carrier with IVA module.
Details the standard configuration and assignment of footswitch and handle functions.
Guides on adjusting diopter settings for users to ensure sharp focus.
Explains how to balance and lock the parallelogram for safe operation.
Instructions for attaching sterile controls and drapes to the microscope.
Step-by-step guide to powering on the microscope for both CT42 and F42 stands.
Explains the surgeon panel interface, icons, and touch functions.
Details initial and fine positioning of the optics carrier.
Explains how to adjust illumination brightness, magnification, and focus.
Explains the quick access line and the main menu structure of the control unit.
Describes how to select and manage user profiles on the control unit.
Explains how to use preset configurations for different operations.
Describes the user list and how to switch between user screens.
Explains how to view the current user's settings.
Introduces the user settings menu for configuring parameters.
Guides on setting initial values for Main Light, Red Reflex, and Magnification.
Guides on setting start values for motor speeds (magnification, focus, XY).
Explains how to configure footswitch functions for different modes.
Explains how to assign functions to the microscope handles.
Lists common malfunctions and their causes and remedies.
Explains how to interpret and acknowledge error messages from the control unit.
To Next Page
