Leica T-Scan 5 - T-Scan Sensor Details

2.4 T‑Scan Components
2.4.1 T‑Scan Sensor
007444_001
a
b
d
c
a Aperture for laser beam
(scan line)
b Aperture for pilot beam
c Aperture for receiver
optics
d Trigger key
007445_001
a
b
d
c
e
f
g
a Status LED for T‑Scan
controller
b Trigger key (front side)
c Marker LED
d Stand-off indicator LED
e Status LED for Laser
Tracker
f Reflector
g Speaker
NOTICE
Too much strain on the cable when bending it for a prolonged time
Putting too much strain on the cable when bending it for a prolonged time
may damage the cable.
Precautions:
▶
Ensure that the bending radius is not less than 8 cm when bending the
cable for a prolonged time.
Front view
Back view
16 Description of the System